Today, flash chromatography instruments are evolving with the built-in capability of determining masses of individual components in the crude mixture, and allowing separation by molecular mass. The technology producing this result is quite astonishing.
Flash purification is a powerful, cost-effective technique for purifying compounds from mixtures, typically those resulting from organic synthesis in medicinal, agro and fine chemical laboratories. In 2013, Biotage released Isolera™ Dalton, greatly increasing the power and versatility of flash purification by introducing a mass detector, allowing purification of compounds on the basis of their mass. During flash purification with Isolera Dalton, m/z values for parent ions of interest can be either entered manually, or automatically detected from a direct injection of the mixture to be purified. Up to four ions can be monitored in this way, with the option to trigger fraction collection by mass.
Direct injection of sample mixture is an optional part of the purification procedure. The purpose of this procedure is two-fold:
During this process, a small amount of the solution of interest is slowly injected into the Isolera™ Dalton Nanolink port at a concentration of typically 1 mg/ml. As the solution passes through the system, aliquots of material are sampled into the mass spectrometer and a spectrum is acquired every second. The sampling of the solution is confirmed during the injection by an increase in the total ion count. After the solution has passed through the system, a wash with pure solvent is performed to clean the tubing. At the end of this process, a accumulated mass spectrum is displayed.
One of the most noticeable features is the way in which data from the direct injection process is captured and displayed, and how it compares to data from an analytical mass spectrometer. The Isolera™ Dalton spectrum is in fact accumulated data from all the spectra obtained during the injection. This is to maximize the possibility of seeing the peak of interest – especially important for flash users.
To illustrate the unique way in which the data is accumulated and displayed, a single mass spectrum from the direct injection procedure was extracted and viewed using Masscape software.
Biotage Industrial Flash Cartridges Explained
Finally - an Easy Urine Sample Preparation for LC/MS Analysis
A Smorgasbord of Analytical Methods
Extraction of Acidic Catecholamine Metabolites in Plasma Using EVOLUTE® EXPRESS ABN Prior to LC-MS/MS Analysis
Seminar: An Introduction to the Biotage Automated Workflow Solution