n-Hexane-extractable material (HEM), often termed oil & grease, is an operationally-defined general measurement used around the world to help assess water pollution due to a variety of hydrocarbons, including dissolved aromatics, benzene, toluene, xylene and dispersed polynuclear aromatic hydrocarbons (PAHs), aliphatics, naphthenic and fatty acids.1
Tags: Application Notes, Disk, English, Environmental, Hexane Extractable Material, Oil & Grease, Oil & Grease, US EPA Method 1664, Waste water

Oftentimes it becomes necessary to test sea water for oil and grease analytes. Whether it is due to a controlled release of effluent water from a waste water treatment plant (usually during large rain storms) or a large oil spill, there is a need generated for a reliable, automated extraction and evaporation system.
Tags: Application Notes, Disk, English, Environmental, Hexane Extractable Material, Oil & Grease, Oil & Grease, Sea Water

The purpose of this application note is to introduce a modification to the preprogrammed methods on the Biotage® Horizon 1000/3000XL Controller with application firmware version 2.2. The methods are utilized in the solid phase extraction (SPE) process to extract samples for EPA Method 1664AB and fulfill QC requirements.
Tags: Application Notes, Disk, EPA 1664 A Analytes, EPA 1664 B Analytes, English, Environmental, Gravimetric, Oil & Grease, Total Petroleum Hydrocarbons (TPH, SGT-HEM), Water

The purpose of this application note is to demonstrate the viability of a solid phase extraction (SPE) method utilizing the Biotage® Horizon 4790 Extractor with the Envision® Platform software version 1.02 to extract samples for EPA Method 1664A/B and fulfil all QC requirements.
Tags: 4790, Application Notes, Disk, EPA 1664 A Analytes, EPA 1664 B Analytes, English, Environmental, Gravimetric, Oil & Grease, Total Petroleum Hydrocarbons (TPH, SGT-HEM), US EPA Method 1664, Water

The purpose of this application is to demonstrate the viability of a solid phase extraction (SPE) method utilizing the Horizon Technology SPE-DEX 1000/3000XL Controller with application firmware version 2.2 to extract samples for EPA Method 1664A/B and fulfill all QC requirements.
Tags: Application Notes, Disk, EPA 1664 A Analytes, EPA 1664 B Analytes, English, Environmental, Gravimetric, Oil & Grease, US EPA Method 1664, Waste water

The purpose of this application note is to ensure that your environmental laboratory is in compliance with EPA Method 1664A Modifications or EPA Method 1664B utilizing the Horizon Technology SPE-DEX® 1000XL/3000XL Controller with application firmware version 1.08.
Tags: Application Notes, EPA 1664 A Analytes, EPA 1664 B Analytes, English, Environmental, Gravimetric, Oil & Grease

Oil and grease (n-hexane extractable material) is a general indicator of the amount of hydrocarbons in a water supply. The Biotage Horizon 3100 automates the entire extraction process, fully compliant with US EPA Method 1664A/B, ISO 11349 and Standard Methods 5520B.
Tags: Brochures

Certified Concentrations: Hexadecane - 4.0 mg/mL; Stearic Acid - 4.0 mg/mL
Tags: Certificate of Analysis

Tags: Certificate of Analysis

Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology's Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedures.
Tags: Certificate of Analysis

Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology's Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedures
Tags: Certificate of Analysis

Certificate of Analysis for Oil & Grease QC Standard, P/N 50-021-HT, Lot No. 077
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedures
Tags: Certificate of Analysis

Tags: Certificate of Analysis

Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedures
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

Tags: Certificate of Analysis

This is to certify that the material provided has been manufactured and tested in accordance with the criteria given by EPA Method 1664 Revision A and B. All testing is completed using automated solid phase extractors manufactured by Horizon Technology.
Tags: Certificate of Analysis, English

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

This certificate confirms that the material tested in is compliance with specifications provided in Horizon Technology’s Quality Control standards for the manufacture of finished products and meets performance specifications provided in the final test procedure.
Tags: Certificate of Analysis

Tags: Certificates

The SPE-DEX 3100 Extractor is controlled through a small hand-held controller tethered to the instrument. The color touch screen is easy to see from any angle and features large icons to show the status of each station in the unit at any time.
Tags: Manuals & User Guides, Product Notes

US EPA Method 1664 for Hexane Extractable Material (HEM) or Oil and Grease has allowed use of solid phase extraction (SPE) instead of liquid-liquid extraction (LLE) with hexane since 2007 and this has been widely adopted in the US. SPE is an equivalent extraction technique to LLE and produces the same n-hexane extract. The extract, similar to LLE, may contain residual water that must be treated properly and removed from the n-hexane extract.
Tags: Environmental, Posters

This reference guide helps to make container identification easier. The company part numbers are for convenience only and any equivalent may be substituted to allow local supply
Tags: English, Product Notes

Oil and Grease is an important general measurement that can be used to indicate water quality and help ensure consistent wastewater treatment plant operation. Automated solid phase extraction can help to make the process more reproducible and easier to fit into the laboratory workflow. The SPE-DEX 3100 offers reliable operation, even with highly particulated samples.
Tags: Product Notes

Tags: Product Notes, Sole Source/Lockout Specs

The SPE-DEX 3100 Extractor is controlled through a small hand-held controller tethered to the instrument. The color touch screen is easy to see from any angle and features large icons to show the status of each station in the unit at any time.
Tags: Manuals & User Guides, Product Notes

The Horizon Technology WaterTrap uses a membrane to separate water from nonpolar organic solvents. The technique is clean, fast and easier to use than sodium sulfate, a chemical drying agent.
Tags: Product Notes

Horizon Technology products revolve around making oil and grease analyses and semivolatile organic extractions safer, faster, more accurate and reproducible. Best of all, with reduced solvent usage, costs are reduced! Coupled with rugged hardware, applications and support, your lab can be more productive than ever before.
Tags: Product Notes

The quality of the solid phase disk used for extraction is key to the success and ease of an analysis. Horizon Technology’s Pacific™ Premium Oil & Grease SPE disks for Method 1664/ISO 11349 meet all Initial Precision and Recovery (IPR), Method Detection Limit (MDL) and Ongoing Precision and Recovery (OPR) limits specified by the US EPA, while saving the lab extraction time and solvent volume. Both 47 and 100-mm disks are fast-flowing and have a high-retention capability, which increases efficiency without compromising recoveries.
Tags: Product Notes

Tags: Product Notes, Sole Source/Lockout Specs

Oil & Grease standards come in pre-measured Teflon tubes of 10 mL each. Each tube contains 20 mg of n-Hexadecane and Stearic Acid for a total concentration of 40 mg. Care must be taken upon the introduction of the spiking solution to the sample bottle.
Tags: Tech Tips